|
NO. |
Standard machine |
|
1 |
Unwind(Max unwind dia.700mm; Air expanding mandrel 3") |
|
2 |
BST web guider(Edge position control) |
|
3 |
Full rotary flexo printing(1 1rubber roller, 1 anilox roller and chiller drum) |
|
4 |
UV dryer(Taiwan UV light) |
|
5 |
Cold foil(max unwind&rewind dia.400mm) |
|
6 |
Semi/full rotary die cutting(120T Magnetic cylinder, register sensor) |
|
7 |
Slitting: Min slitting max-width='100%' width 16mm(6sets blades) |
|
8 |
SingleRewind(Maxrewind dia.700mm; Air expanding mandrel 3") |
|
9 |
Waste matrix(Maxrewind dia.600mm; Air expanding mandrel 3") |
Feature:
1. Mother reel end photocell with automatic stop.
2. Full rotary flexo printing module support sport varnishing/cold foil
3. Die cut unit able to work full rotary mode and semi rotary mode.
4. Precision cutting to reduce waste
3. Die cut station with servo register control.
4. Internet fault diagnostics .
5. Dual 3”pneumatic rewinder for a max roll diameter of 450mm with independent tension control.(optional )
6. High accuracy re-register system, provide you higher quality and efficiency.
Teachnical Specifications:
|
Max Web Width |
450mm |
|
Max Unwinding Dia |
700mm |
|
Max Rewinding Dia |
700mm |
|
Max Speed of Flexo printer |
90m/min |
|
Max Semi Rotary Die Cutting Speed |
60m/min |
|
Max Full Rotary die cutting Speed |
90m/min |
|
Accuracy of Adhesive Cutting |
±0.15mm |
|
Power |
3 PH+N+PE |
|
Air supply |
0.4~0.6MPa |
|
Overall Diameter（L×W×H） |
3600mm×1370mm×1925mm |
|
Weight |
3800KG |
The double-unit trademark die-cutting and hot stamping machine adopts a synchronous transmission mechanism to realize the synchronous movement of the two molding units. A closed transmission chain is used to drive the gripper row to transfer the paper to two molding units in turn to achieve hot stamping, creasing or die cutting processes.
It uses an accurate rotary die-cutting system and performs material conversion through micro-control. Die cutting, waste rewinding and finished product rewinding are all in one process. Main control PLC and man-machine interface, with functions such as edge detection and watch detection. The cutting system uses magnetic powder clutch and magnetic powder brake to control the synchronization of cutter and die cutting. Separate waste motor control.
Unwind-Max unwind dia.700mm; Air expanding mandrel 3" Web guide-Maxcess Web guide ( Edge position control ) Flat bed die cutting-Eye mark sensor, height of the blade 9.5mm ( with upper blade and the bottom blade ) Rewind-Single rewind, Max unwind dia.700mm; Air expanding mandrel 3" Waste matrix-Max unwind dia.600mm; Air expanding mandrel 3"
Bienvenida a nuestra página web. Podría contacto con nosotros en inglés por los siguientes métodos en cualquier momento, le repondríamos antes posible para proporcionar los services adecuados.
Please feel free to leave us a message, We will always pay attention to your inquiry and inquiry.
Copyright ? Wenzhou Jixin machinery Co., Ltd. All Rights Reserved. 
